太阳城娱乐

产品推荐

产品推荐

联系我们

地址:昆山石牌东岳路299号
Tel:0512-57731260 57784890
Fax:0512-57784890
Mob:13951181411
info@fizzgrid.com
网址:www.fizzgrid.com

无镍封孔剂

无镍封孔剂

详细介绍


FASTSEAL 无镍封孔剂

Introduction 简介

After anodising the pores are still open。 These pores have to be closed by dipping the anodised aluminium into deionised water of 96 - 99°C. With FASTSEAL it is possible to close the pores at a significant lower temperature. Already at temperatures of 88°C and with 3 minutes/micron an excellent sealing quality is obtained.

阳极氧化后孔隙仍然打开着,槽浸于 96-99℃的去离子水中可以封闭孔隙,使用 FASTSEAL 密封剂,就可以用低得多的 88℃温度,以 3 分钟/微米的速度高质量地封闭孔隙

 

FASTSEAL is approved by the QUALANOD organisation [QND-005].

FASTSEAL 通过了 QUALANOD 认证

 

The product can also be used at 96°C. At this temperature the sealing time can be reduced to 2

minutes per micron。 如果在 96℃下使用本品,封孔速度可以达到 2 分钟/微米

 

FASTSEAL consists of two components: FASTSEAL MK-UP and FASTSEAL REPL. Both are liquid

products especially developed for hot-water sealing of anodised aluminium. In this way it is possible to avoid the formation of whitish powder (Böhmit), eliminate wiping off and prevent iridescence. By its regulating action FASTSEAL results in a high quality sealing even if the water quality is not optimal.

FASTSEAL 由两部分组成,FASTSEAL MK-UP FASTSEAL REPL,专门为铝材阳极氧化热水封孔开发的液体产品。这种方式,可以有效地避免产生白色粉末和色晕. 通过调节,即使水质不是最佳,FASTSEAL一样可以达到很好的封孔品质。

 

 

 

Operation Conditions 工作条件

 

Operation Conditions 工作条件

Concentration 浓度

FASTSEAL MK-UP [ml/l]

2 - 3

pH range PH 范围

5,8 - 6,2

Temperature [°C] 温度

88-99

Immersion time [minuten / micron]

槽浸时间 ( 分钟/um)

2-3

 

相关标签:

上一篇:高温封孔剂
下一篇:无氮中和除灰剂

相关产品:

相关新闻:

欢迎给我们留言
请在此输入留言内容,我们会尽快与您联系。
联系人
座机/手机号码
祥云平台技术支持
广东11选5 广东11选5 广东11选5走势图 广东11选5 爱波网 太阳城娱乐 太阳城娱乐APP下载 广东11选5 爱波网 广东11选5